The Granberg G801A Auxilliary Oiler Kit is designed to mount with double end saw bars larger than 36". Oil is injected into the groove at the working end of the saw bar. Flow is controlled by a valve on the tank, and oil is delivered by gravity.

• Extends saw bar life provides for cooler cutting and prevents early bar wear. For non double end bars, two holes must be drilled in saw bar tip. Newer saws with better oiling systems may not require additional lubrication
• Provides for cooler cutting prevents early bar wear. For non double end bars, two holes must be drilled in saw bar tip. Newer saws with better oiling systems may not require additional lubrication
• Prevents early bar wearNewer saws with better oiling systems may not require additional lubrication
• For non double end bars, two holes must be drilled in saw bar tip
• Newer saws with better oiling systems may not require additional lubrication
• Weight 2.0 Lbs